The HYDX-5C new model Full Hydraulic Core Drill Rig is developed with reference of advanced technique of same kind equpi ment at home and abroad.
The drill rig has a reasonable design and superior performance. It is easy for operation and maintenance.
Overall Unit Features:
The drill rig adopts full hydraulic driving, tire trail-type. The drill head is driven by variable motor with function of two-speed mechanical gear shifts, stepless speed change with an advanced and simple structure. The drill head is fed and driven with a system connecting the hollow spindle and oil cylinder with chain. The system has the function, if the piston rods of oil cylinder moving one certain distance, the drill head moving will double the distance. The mast could be adjusted within the range of angle 0 to 90 degree for its drilling hole with a low center of gravity and good stability of the overall unit. The rig provides operator with a nice field of vision and wide and comfortable working condition. The rig looks pretty in overall structure and embodies the design thought of people oriented.

Main Performance Parameters of YDX-5C
The figures in these tables have been calculated, based on field experiences, and may be reasonably expected.
Actual drilling capacity will depend on in-hold tools and conditions, drilling techniques and equipment used.

Diesel Engine	Model	Cummins 6CTA8.3-C195 (turbocharged and charge water cooled)
	Displacement	8.3L (2.19 US Gallons)
	Power	145kW (195HP)
	Rated RPM(Factory setting)	2200rpm
Drilling Capacity	BQ	1500 m(4920 feet)
	NQ	1300 m(4264 feet)
	HQ	1000 m(3280 feet)
	PQ	680 m(2230 feet)
Drill Head	Rotation Motor	Double Hydraulic Motors –variable and Reversible Maker:SAUER-DANFOSS
	RPM	Two Shifts/ Stepless Change 0-1145 RPM
	Ratios	1st 8.776:1 2nd 2.716:1
	Head Opener	sidewise sliding way with hydraulic drive
	Hydraulic Chuck(PQ)	Hydraulically opened, Disc Spring Clamping, Normally Closed Type Axial Holding Capacity of 222 400 N
	Max. Torque	4650 N·m(3427 lbf·ft)
	Hold Diameter	121 mm(4.76 inch)
	Max. Lifting capacity of Spindle	150 kN(33720 lbf)
	Max. Feeding Power	75 kN(16860 lbf)

Primary Pump Package	Axial Piston variable displacement Triplex pump for driving of Drill Head Rotation, Main Hoist, Mud Pump & Line Winch.	Maker: DANFOSS 1st Pump:150LPM at 28.5MPa 2nd Pump:120LPM at 25MPa 3rd Pump: 102 LPM at 25MPa
Hydraulic Tank	Capacity	420 L (111 US Gallons)
Capacity of Main Hoist	Hoisting Speed (single wire)	38-70m/min(bare drum)
	Hoisting force (single wire)	77kN(17310 lbf)
	Steel Wire Diameter	18 mm(0.71 inch)
	Steel Wire Length	50 m(164 feet)
Capacity of Wireline Hoist	Hoisting Speed (single wire)	164m/min (bare drum)
	Hoisting Force (single wire)	12 kN(2698 lbf) (bare drum)
	Steel Wire Diameter	6 mm(0.24 inch)
	Steel Wire Length	1500 m(4920 feet)
Mast	Mast Height	11 m(36 feet)
	Mast Adjusting Angle	0°—90°
	Drilling Angle	45°—90°
	Feeding Stroke	3800 mm(150 inch)
	Slippage Stroke	1500 mm(59 inch)
	Feed Pull	15000kg(33075 lb)
	Feed Thrust	7500kg(16538 lb)
	Rod Pull	3m or 6m(9.84feet or 19.68feet)
Mud Pump	Type	Reciprocating Pump Triplex Plunger
	Model	BW250
	Stroke	100mm(3.9 inch)
	Output volume	250,145, 90, 52 L/min (66, 38, 24, 14 US Gallons/min)
	Discharge pressure	2.5, 4.5, 6.0, 6.0 Mpa (363, 653, 870, 870 psi)
Foot Clamp	Clamping Scope	55.5-117.5 mm(2.19-4.63 inch) through hole Ф154mm(6.06 inch)

Other

Weight

10000 Kg(22050 lb)

Working Dimensions (L × W ×H )

5652×2130×10200mm

(222.5×83.9×401.6 inch)

Transport Dimensions (L × W ×H )

5970×2130×2730mm (235×83.9×107.5 inch)

Transport Way

Tire type

Product Tags:

hydraulic drilling rig

hydraulic drill rig

Inquiry Cart 0